Chimney & Fireplace

Chimney sweep and cleaning in Fort Worth, TX

North Texas fireplaces work in short, intense bursts — weeks of heavy use during cold snaps, then months sitting idle through the summer. That cycle is exactly what builds creosote in wood-burning flues and invites birds, wasps, and debris into unused chimneys. Emerson Chimney & Fireplace provides professional chimney sweeping, cleaning, Level 1 and Level 2 inspections, chimney repair, and gas and wood-burning fireplace service for homeowners across Fort Worth, Arlington, Mansfield, Keller, North Richland Hills, Burleson, and the western DFW area. Every visit starts with an honest assessment and a written quote, so you know exactly what your chimney needs before any work begins.

Two $129 chimney service options in Fort Worth

Choose the visit that best fits what your fireplace and chimney need. Both options provide clear, upfront service with no pressure to purchase unnecessary work.

Option 1: Chimney & Fireplace Sweep + Multi-Point Safety Check — $129

Comprehensive seasonal maintenance designed to help keep your fireplace clean, functional, and ready for use.

What’s included in your visit:

Fireplace & Hearth Cleanout: We remove ash, soot, and loose debris from the firebox and grate so your hearth is tidy and ready for use.

Standard Chimney Flue Sweep: Routine brushing of accessible flue passages to reduce soot buildup and help maintain proper airflow.

Multi-Point Visual Safety & Condition Check: A systematic visual evaluation of readily accessible components, including:

• Firebox, refractory panels, and hearth integrity
• Damper operation, including opening, closing, and seal
• Visible flue interior for noticeable creosote buildup or blockages
• Exterior chimney cap and crown where safely visible from the ground or roofline

Technician Overview: Clear, upfront feedback on the current condition of your fireplace and chimney, including any recommended next steps.

Option 2: Chimney & Fireplace Inspection — $129

A focused inspection for homeowners who want to understand the condition of their chimney and fireplace before deciding whether cleaning, repair, or another service is needed.

Chimney repair costs in Fort Worth

Repair pricing is driven by what the inspection finds. The most common repairs on Fort Worth homes, especially 1980s and 1990s masonry chimneys, fall into these ranges:

Repair	Typical Fort Worth cost	What it fixes
Chimney cap replacement	$150 – $600	Keeps out rain, birds, and embers
Crown repair / sealing	$150 – $400	Cracked concrete crown letting water in
Crown rebuild	$1,000 – $3,000	Severely deteriorated or spalled crown
Masonry repointing (tuckpointing)	$500 – $2,500	Failing mortar joints, loose or spalling brick
Chimney leak repair / flashing	$150 – $600	Water stains on ceilings near the chimney
Flue liner repair or replacement	$2,500 – $7,000	Cracked tiles or damaged liner found on video inspection

How often should your chimney be cleaned and inspected?

The national standard is NFPA 211: every chimney, fireplace, and vent should be inspected at least once a year and cleaned whenever deposits require it. What that means in practice for Fort Worth homes:

Wood-burning fireplaces used regularly need an annual sweep — creosote accumulates with every fire, and as little as a quarter inch of buildup is enough to fuel a chimney fire. Gas fireplaces don't produce creosote but still need annual venting inspections for blockages, corrosion, and draft, plus periodic burner and pilot service. Rarely used or decorative fireplaces still need the annual inspection: unused flues are where we most often find bird nests, wasp activity, and moisture damage that has gone unnoticed for years.

Warning signs your chimney needs attention

1. White staining (efflorescence) on the brick

Those chalky white streaks mean moisture is moving through the masonry. In Fort Worth, that's usually a cracked crown or failed cap letting rain in — cheap to fix early, expensive once the brick starts spalling.

2. Smoke entering the room

A fireplace that smokes usually has a draft problem: blocked flue, closed or rusted damper, or creosote restriction. It's also the sign homeowners most commonly ignore until it becomes dangerous.

3. Pieces of flue tile in the firebox

Thin shards of clay tile collecting in the firebox mean the flue liner is cracking. A damaged liner lets heat and combustion gases reach the home's framing — this is a stop-using-the-fireplace-now finding that requires a Level 2 inspection.

4. Rust on the damper or firebox

Rust means water is getting in where it shouldn't. Beyond the damper itself, that same moisture is usually attacking the mortar joints and liner where you can't see it.

5. Water stains on ceilings near the chimney

Interior stains near the chimney chase almost always trace back to failed flashing or a cracked crown. Both are quick repairs compared to the drywall, insulation, and framing damage they cause when left alone.

6. Crumbling mortar or spalling brick

Fort Worth freeze-thaw cycles are short but violent — water absorbed into masonry expands during hard freezes and pops the brick face off. Repointing failing joints early prevents a full rebuild later.

What to expect from an Emerson chimney visit

1. Protection first. Drop cloths at the hearth and HEPA vacuum running before anything is touched — the sweep leaves no dust in your home. 2. Inspection. Every visit includes a check of the firebox, damper, smoke chamber, and accessible flue; Level 2 visits add a full video scan of the flue interior. 3. The work. Sweeping with rotary rods and brushes sized to your flue, debris and nest removal, or the scheduled repair. 4. Report and quote. You get photos of what we found, a clear explanation, and a written quote for any recommended work — no scare tactics, no pressure. Most standard visits take 45 minutes to an hour.

Serving Fort Worth and the surrounding area

Emerson Chimney & Fireplace is based at 6850 Manhattan Blvd Suite 510/13, Fort Worth, TX 76120, serving homeowners across Fort Worth, Arlington, Mansfield, Keller, North Richland Hills, Burleson, and the western DFW metroplex since 2019. Dallas-side homeowners can visit our Dallas chimney and fireplace page. Call 682-703-9980 for same-week scheduling.

Chimney and fireplace questions Fort Worth homeowners ask

How much does a chimney sweep cost in Fort Worth?

Emerson Chimney & Fireplace offers two $129 options: a Chimney & Fireplace Sweep + Multi-Point Safety Check, or a Chimney & Fireplace Inspection. If the inspection identifies cleaning, repair, or installation work and you choose Emerson to complete it, the full $129 inspection fee is credited toward that service.

How much does chimney repair cost in Fort Worth?

Minor chimney repairs such as crown sealing or cap replacement typically run $150 to $600. Masonry repointing runs $500 to $2,500 depending on extent, and full flue liner replacement can run $2,500 to $7,000. An inspection first identifies exactly what is needed so you never pay for guesswork.

How often should a chimney be cleaned?

NFPA 211 calls for chimneys to be inspected at least once a year and cleaned as needed. For wood-burning fireplaces used regularly, that usually means an annual sweep. Cleaning is required whenever creosote glaze is forming, since as little as a quarter inch of buildup is enough to fuel a chimney fire.

Do gas fireplaces need chimney service too?

Yes. Gas fireplaces do not produce creosote, but their venting still needs annual inspection for blockages, corrosion, and proper draft, and the burner, pilot, and logs need periodic service to run safely and efficiently. Bird nests and debris in gas flues are a common Fort Worth find.

What is the difference between a Level 1 and Level 2 chimney inspection?

A Level 1 inspection is a visual check of accessible parts of the chimney and flue, appropriate when nothing has changed and the system is under regular use. A Level 2 inspection adds a video scan of the flue interior and is required when buying or selling a home, after a chimney fire or storm damage, or when changing fuel type or appliance.

What are the signs my chimney needs repair?

Watch for white staining on exterior brick, spalling or flaking masonry, cracked crown mortar, rust on the damper or firebox, water stains on the ceiling near the chimney, smoke entering the room, and pieces of flue tile in the firebox. Any of these signs warrants an inspection before the next fire.

How long does a chimney sweep take?

A standard sweep and cleaning takes about 45 minutes to an hour for most Fort Worth homes. A sweep combined with a Level 2 video inspection typically takes 1.5 to 2 hours. Technicians use drop cloths and HEPA vacuums so the process leaves no mess in your home.

Should I get a chimney inspection before buying a home in Fort Worth?

Yes. A Level 2 chimney inspection is the standard recommendation for any real estate transaction, and general home inspectors do not scan flue interiors. Hidden flue damage is one of the most expensive surprises a buyer can inherit, with liner replacement running into thousands of dollars.

What is creosote and why is it dangerous?

Creosote is the tar-like residue wood smoke deposits inside the flue as it cools. It builds in stages, from flaky soot to a hardened glaze, and it is highly flammable — the leading factor in home heating fires is failure to clean it out. Annual sweeping keeps it from ever reaching dangerous levels.

Can I use my fireplace before it's been inspected this year?

It is not worth the risk. Most chimney fires happen during the first fires of the season, when a summer's worth of nests, debris, or last year's creosote is still in the flue. An inspection takes under an hour and confirms the system is safe before you light anything.

Why is my fireplace smoking into the room?

The most common causes are a closed or stuck damper, a blocked or dirty flue, a cold flue that has not established draft, or negative air pressure in tightly sealed homes. A cleaning and draft check identifies the cause — persistent smoking should never be ignored, as it can indicate a dangerous blockage.

Do you repair chimney leaks?

Yes. Chimney leaks in Fort Worth usually trace to a cracked crown, failed flashing, missing cap, or saturated masonry. We diagnose the actual entry point rather than guessing, then repair the crown, flashing, or cap and apply masonry water repellent where appropriate.

Do you service both wood-burning and gas fireplaces?

Yes. We sweep and repair wood-burning fireplaces and chimneys, and we inspect, clean, and service gas fireplace venting, burners, pilots, and log sets across the Fort Worth area.

What areas do you serve?

We serve Fort Worth, Arlington, Mansfield, Keller, North Richland Hills, Burleson, and surrounding western DFW communities from our Preston Road location. Fort Worth and the eastern metroplex are served by our Fort Worth team.